E&I Designer Antwerp from Contec

Back

(Junior) Automation Engineer Ploiesti

Ploiesti, Romania

Employee

Option for/Allows Remote Job

Romania

We probably don't need to tell you that automation is the future. At Contec, we make it our mission to make industrial processes future-proof. We are in full growth and therefore constantly looking for new colleagues. Are you ready to build the factory of the future with us?

For our Manufacturing Control team, which is mainly occupied with PLC programming and visualization, we are currently looking for an Automation Engineer with a passion for automation.

Projects from A-Z, this is how we do it!

At Contec we realize projects from A to Z. As an Automation Engineer you are not only responsible for the technical aspect: communication with the customer and the start-up of a wide range of projects are also part of your duties.

Develop a function design specification (FDS) in which you analyse the client's assignment (URD) and find the most optimal solution to meeting these requirements;
Develop the PLC programming and visualization (HMI interfaces) as per your approved FDS. This could be by the clients standard or Contec own standards;
Ensure the connection and data exchange of the PLCs with parent systems in collaboration with our MOM / MES department;
Preparation and internal office simulation with clients (FAT). Clients are invited to our office or remotely to participate;
Commissioning and start-up on site to test your work in reality (SAT) and fine-tune it;
Compiling the required documentation needed to meet project milestones. FDS, Operator/training manuals, etc;
Provide aftercare support as required by the project;
Liaising with the project team and clients to complete the project as required.

You always do all this in close collaboration with your project coordinator and your team.

Passion for automation? It’s you we’re looking for!

You have a bachelor’s or master’s degree Industrial Engineer, preferably Electrical Engineering or Electromechanics, or you are equivalent through experience;
You have a driver’s license;
You speak and write English fluently;
Can work both autonomously and as part of a team;
Proactive and logical approach to problem-solving;
Have an adventurous spirit; you enjoy learning new things and love exploring the world together. For your colleagues, travelling is a fun and educational experience, so we hope you'll get excited about it too;
Proficient in MS Office;
Knowledge of either of the following automation technologies is required:
Rockwell; Studio 5000, FTview,…
Siemens; Step7, TIA Portal, WinCC, PCS7,…
Knowledge of the following is beneficial but not required:
Schneider; EcoStruxure Control Expert and Operator Terminal Expert,…
Networks; ProfiNet, Ethernet-IP, Profibus, DeviceNet, ControlNet,…

Why Contec?

Be a part of the Contec group

With our 9 international offices, the Contec Group has some 250 motivated specialists who would love to welcome you to their team. We have a flat organisational structure resulting in an open and transparent atmosphere. Furthermore, our employees can participate in Contec's shareholder plan and are given the chance to work on international projects within a variety of sectors.

Guidance on the job

A good balance of young talent and experienced colleagues ensure that you will receive appropriate guidance throughout your Contec career;
A training offer for further development both personally and professionally.

Work-life balance

Flexible hours: start between 07h00 & 09h30 and stop between 15h30 & 18h00;
Glide hours;
Possibility to work from home;
21 legal holidays, plus 2 bridge days, plus days off when official holidays take place in the weekends;
Seniority leave as of 10 years of employment: 1 additional day each 5 year (up to a maximum of 4 additional days).

A salary package with the following additional benefits

Meal vouchers;
Vacation tickets;
Private pension ;
Hospitalisation insurance (and partially paid for your family members);
Mobile phone subscription.

Almost convinced? Read here what our colleagues think about working within Contec:

https://contec-ias.com/jobs/#testimonials

Ready to say YES to new adventures? Apply quickly, or send us your CV via recruitment@contec-ias.com

Not your thing, but do you know the ideal person for this job? Feel free to share the vacancy via our social media channels or via email.

Back

Apply

Back

(Junior) Electrical Engineer (E&I) Hasselt

Hasselt, Belgium

Employee

Partial Remote Job

Hasselt

We probably don't need to tell you that automation is the future. At Contec, we make it our mission to make industrial processes future-proof. We are in full growth and therefore constantly looking for new colleagues. Are you ready to build the factory of the future with us?

For our E&I team, we are currently looking for an Electrical Engineer with a passion for industrial engineering and design.

Projects from A-Z, this is how we do it!

At Contec we realize projects from A to Z. As an Electrical Engineer you will be involved in our current projects. You are responsible for the following matters, among others:

Designing of schematics, cabinet layouts and component selection in accordance with customer specifications and legal requirements;
Supervision of projects according to the agreed scope and planning;
Assistance during factory acceptance tests (FAT), field testing, commissioning & start-ups;
Compiling the required documentation needed to meet project milestones;
Liaising with the project team and clients to complete the project as required.
You attend follow-up meetings with the client. You ensure that you are always well prepared for these and report afterwards so that internal and external parties are constantly informed of the project progress.

You always do all this in close collaboration with your project coordinator and your team.

Passion for automation? It’s you we’re looking for!

You’ve obtained a bachelor’s/master’s degree in industrial engineering, preferably in Electrical Engineering or Electromechanics, or you are equivalent through experience;
Can work both autonomously and as part of a team;
Proactive and logical approach to problem-solving;
You have a drivers license;
You speak and write English fluently;
Have an adventurous spirit; you enjoy learning new things and love exploring the world together. For your colleagues, travelling is a fun and educational experience, so we hope you'll get excited about it too.
Knowledge of the following is beneficial:
- Cable calculations
- Selection of electrical components
- Knowledge of legal standards and guidelines such as AREI, EN60204.1, etc.
- Eplan P8
- Instrumentation & measurement and control technology
- General business automation
- MS Office, preferably including MS Access

Why Contec?

Be a part of the Contec group

With our 9 international offices, the Contec Group has some 250 motivated specialists who would love to welcome you to their team. We have a flat organisational structure resulting in an open and transparent atmosphere. Furthermore, our employees can participate in Contec's shareholder plan and are given the chance to work on international projects within a variety of sectors.

Guidance on the job

A good balance of young talent and experienced colleagues ensure that you will receive appropriate guidance throughout your Contec career;
A training offer for further development both personally and professionally.

Work-life balance

Flexible hours: start between 07h00 & 09h30 and stop between 15h30 & 18h00;
Glide hours;
Possibility to work from home (1 day/week);
20 legal holidays, 12 ADV days and the option to buy up to 5 additional holidays through our cafeteria plan.

A salary package with the following additional benefits

Meal vouchers;
Group and hospitalisation insurance, insurance guaranteed income;
Possibility of company car with fuel card (depending on position);
Mobile phone subscription;
Cafeteria plan.

Almost convinced? Read here what our colleagues think about working within Contec:

https://contec-ias.com/jobs/#testimonials

Ready to say YES to new adventures? Apply quickly, or send us your CV via recruitment@contec-ias.com

Not your thing, but do you know the ideal person for this job? Feel free to share the vacancy via our social media channels or via email.

Back

Apply

Back

(Junior) Electrical engineer Amiens

Dury, France

Employee

Partial Remote Job

France

We probably don't need to tell you that automation is the future. At Contec, we make it our mission to make industrial processes future proof. We are in full growth and therefore constantly looking for new colleagues. Are you ready to build the factory of the future with us?

For our E&I team, we are currently looking for an Electrical Engineer with a passion for industrial engineering and design.

Projects from A-Z, this is how we do it!

At Contec we realize projects from A to Z. As an Electrical engineer you will be involved in our current projects. You are responsible for the following matters, among others:

Designing of schematics, cabinet layouts and component selection in accordance with customer specifications and legal requirements;
Supervision of projects according to the agreed scope and planning;
Assistance during factory acceptance tests (FAT), field testing, commissioning & start-ups;
Compiling the required documentation needed to meet project milestones;
Liaising with the project team and clients to complete the project as required;
You attend follow-up meetings with the client. You ensure that you are always well prepared for these and report afterwards so that internal and external parties are constantly informed of the project progress.

You always do this in close collaboration with your project coordinator and your team.

Passion for automation? We're looking for you!

You’ve recently obtained a bachelor’s/master’s degree in industrial engineering, preferably in Electrical Engineering or Electromechanics, or you are equivalent through experience;
can work both autonomously and as part of a team;
Proactive and logical approach to problem-solving;
You have a drivers licens
You speak and write English fluently and preferably apply in English;
Have an adventurous spirit: you enjoy learning new things and love exploring the world together. For your colleagues, travelling is a fun and educational experience, so we hope you'll get excited about it too.
Knowledge of the following is beneficial:
- Cable calculations
- selection of electrical components
- knowledge of legal standards and guidelines such as AREI, EN60204.1, etc.
- Eplan P8
- Instrumentation & measurement and control technology
- General business automation
- MS Office, preferably including MS Access

Why Contec?

Be a part of the Contec group

With our 9 international offices, the Contec Group has some 250 motivated specialists who would love to welcome you to their team. We have a flat organisational structure resulting in an open and transparent atmosphere. Furthermore, our employees can participate in Contec's shareholder plan and are given the chance to work on international projects within a variety of sectors.

Guidance on the job

A good balance of young talent and experienced colleagues ensure that you will receive appropriate guidance throughout your Contec career;
A training offer for further development both personally and professionally.

Work-life balance

Flexible hours: start between 07h00 & 09h30 and stop between 15h30 & 18h00;
Glide hours;
Possibility to work from home; (1 day/week);
25 legal holidays, 25 RTT days.

A salary package with the following additional benefits

Meal vouchers from 8 euros a day:
Possibility of a company car with fuel card (depending on job position);
Mobile phone subscription;
A laptop for professional use;
Travel allowance.

Almost convinced? Read here what our colleagues think about working within Contec:

https://contec-ias.com/jobs/#testimonials

Ready to say YES to new adventures? Apply quickly, or send us your CV via recruitment@contec-ias.com

Not your thing, but do you know the ideal person for this job? Feel free to share the vacancy via our social media channels or via email.

Back

Apply

Back

(Junior) Power Engineer

Antwerpen, Belgium

Employee

Option for/Allows Remote Job

Antwerp

We probably don't need to tell you that automation is the future. At Contec, we make it our mission to make industrial processes future-proof. We are in full growth and therefore constantly looking for new colleagues. Are you ready to build the factory of the future with us?

Our Power team is specialised in a wide range of electrical studies, high-voltage projects and electrical safety. The various software packages we use for this purpose are ALPI Caneco BT, SKM Powertools and Easypower. For this team, we are looking for a Power Engineer with a passion for engineering.

Projects from A-Z, this is how we do it!

At Contec we realize projects from A to Z. As a Power Engineer you will be involved in our current projects. You are responsible for the following matters, among others:

You do short-circuit current calculations;
You evaluate protective devices and electrical cabinets;
You do cable calculations (load, voltage drop, indirect contact);
You carry out motor start studies and selectivity studies;
You do arc calculations (Arc Flash);
You supervise projects according to the agreed scope and planning;
You follow up projects according to customer specifications and legal standards;
You compile the documents required to successfully complete the project at the various stages.

You always do all this in close collaboration with your project coordinator and your team.

Passion for automation? It’s you we’re looking for!

You’ve obtained a bachelor’s/master’s degree in industrial engineering, preferably in Electrical Engineering or Electromechanics, or you are equivalent through experience;
Can work both autonomously and as part of a team;
Proactive and logical approach to problem-solving;
You have a drivers license;
You speak and write English fluently;
Knowledge of the following is beneficial:
- Cable calculations
- Selection of electrical components
- Knowledge of legal standards and guidelines such as AREI, EN60204.1, etc.
- MS Office, preferably including MS Access
- Software packages: Caneco, SKM Powertools, Easypower

Why Contec?

Be a part of the Contec group

With our nine international offices, the Contec Group has some 250 motivated specialists who would love to welcome you to their team. We have a flat organisational structure resulting in an open and transparent atmosphere. Furthermore, our employees can participate in Contec's shareholder plan and are given the chance to work on international projects within a variety of sectors.

Guidance on the job

A good balance of young talent and experienced colleagues ensure that you will receive appropriate guidance throughout your Contec career;
A training offer for further development both personally and professionally.

Work-life balance

Flexible hours: start between 07h00 & 09h30 and stop between 15h30 & 18h00;
Glide hours;
Possibility to work from home (1 day/week);
20 legal holidays, 12 ADV days and the option to buy up to 5 additional holidays through our cafeteria plan.

A salary package with the following additional benefits

Meal vouchers;
Group and hospitalisation insurance, insurance guaranteed income;
Possibility of company car with fuel card (depending on position);
Mobile phone subscription;
Cafeteria plan.

Almost convinced? Read here what our colleagues think about working within Contec:

https://contec-ias.com/jobs/#testimonials

Ready to say YES to new adventures? Apply quickly, or send us your CV via recruitment@contec-ias.com

Not your thing, but do you know the ideal person for this job? Feel free to share the vacancy via our social media channels or via email.

Back

Apply

Back

Associate Automation Engineer Antwerp

Antwerpen, Belgium

Employee

Option for/Allows Remote Job

Antwerp

We probably don't need to tell you that automation is the future. At Contec, we make it our mission to make industrial processes future-proof. We are in full growth and therefore constantly looking for new colleagues. Are you ready to build the factory of the future with us?

For our Manufacturing Control team, which is mainly occupied with PLC programming and visualization, we are currently looking for an Automation Engineer with a passion for automation.

Projects from A-Z, this is how we do it!

At Contec we realize projects from A to Z. As an Automation Engineer you are not only responsible for the technical aspect: communication with the customer and the start-up of a wide range of projects are also part of your duties.

Develop a function design specification (FDS) in which you analyse the client's assignment (URD) and find the most optimal solution to meeting these requirements;
Develop the PLC programming and visualization (HMI interfaces) as per your approved FDS. This could be by the clients standard or Contec own standards;
Ensure the connection and data exchange of the PLCs with parent systems in collaboration with our MOM / MES department;
Preparation and internal office simulation with clients (FAT). Clients are invited to our office or remotely to participate;
Commissioning and start-up on site to test your work in reality (SAT) and fine-tune it;
Compiling the required documentation needed to meet project milestones. FDS, Operator/training manuals, etc;
Provide aftercare support as required by the project;
Liaising with the project team and clients to complete the project as required.

You always do all this in close collaboration with your project coordinator and your team.

Passion for automation? It’s you we’re looking for!

You have a bachelor’s or master’s degree Industrial Automation, preferably Electrical Engineering or Electromechanics, or you are equivalent through experience;
You have 3 to 4 years of work experience in automation engineering;
You have a driver’s license;
You speak and write English fluently;
Can work both autonomously and as part of a team;
Proactive and logical approach to problem-solving;
Have an adventurous spirit; you enjoy learning new things and love exploring the world together. For your colleagues, travelling is a fun and educational experience, so we hope you'll get excited about it too;
Proficient in MS Office;
Knowledge of either of the following automation technologies is required:
- Rockwell; Studio 5000, FTview,…
- Siemens; Step7, TIA Portal, WinCC, PCS7,…
Knowledge of the following is beneficial but not required:
- Schneider; EcoStruxure Control Expert and Operator Terminal Expert,…
- Networks; ProfiNet, Ethernet-IP, Profibus, DeviceNet, ControlNet,…

Why Contec?

Be a part of the Contec group

With our 9 international offices, the Contec Group has some 250 motivated specialists who would love to welcome you to their team. We have a flat organisational structure resulting in an open and transparent atmosphere. Furthermore, our employees can participate in Contec's shareholder plan and are given the chance to work on international projects within a variety of sectors.

Guidance on the job

A good balance of young talent and experienced colleagues ensure that you will receive appropriate guidance throughout your Contec career;
A training offer for further development both personally and professionally.

Work-life balance

Flexible hours: start between 07h00 & 09h30 and stop between 15h30 & 18h00;
Glide hours;
Possibility to work from home (1 day/week);
20 legal holidays, 12 ADV days and the option to buy up to 5 additional holidays through our cafeteria plan.

A salary package with the following additional benefits

Meal vouchers;
Group and hospitalisation insurance, insurance guaranteed income;
Possibility of company car with fuel card (depending on position);
Mobile phone subscription;
Cafeteria plan.

Almost convinced? Read here what our colleagues think about working within Contec:

https://contec-ias.com/jobs/#testimonials

Ready to say YES to new adventures? Apply quickly, or send us your CV via recruitment@contec-ias.com

Not your thing, but do you know the ideal person for this job? Feel free to share the vacancy via our social media channels or via email.

Back

Apply

Back

Associate Automation Engineer Łódź

Lodz, Poland

Employee

Option for/Allows Remote Job

Poland

We probably don't need to tell you that automation is the future. At Contec, we make it our mission to make industrial processes future-proof. We are in full growth and therefore constantly looking for new colleagues. Are you ready to build the factory of the future with us?

For our Manufacturing Control team, which is mainly occupied with PLC programming and visualization, we are currently looking for an Automation Engineer with a passion for automation.

Projects from A-Z, this is how we do it!

At Contec we realize projects from A to Z. As an Automation Engineer you are not only responsible for the technical aspect: communication with the customer and the start-up of a wide range of projects are also part of your duties.

Develop a function design specification (FDS) in which you analyse the client's assignment (URD) and find the most optimal solution to meeting these requirements;
Develop the PLC programming and visualization (HMI interfaces) as per your approved FDS. This could be by the clients standard or Contec own standards;
Ensure the connection and data exchange of the PLCs with parent systems in collaboration with our MOM / MES department;
Preparation and internal office simulation with clients (FAT). Clients are invited to our office or remotely to participate;
Commissioning and start-up on site to test your work in reality (SAT) and fine-tune it;
Compiling the required documentation needed to meet project milestones. FDS, Operator/training manuals, etc;
Provide aftercare support as required by the project;
Liaising with the project team and clients to complete the project as required.

You always do all this in close collaboration with your project coordinator and your team.

Passion for automation? It’s you we’re looking for!

You have a bachelor’s or master’s degree Industrial Automation, preferably Electrical Engineering or Electromechanics, or you are equivalent through experience;
You have a driver’s license;
You speak and write English fluently;
Can work both autonomously and as part of a team;
Proactive and logical approach to problem-solving;
Have an adventurous spirit; you enjoy learning new things and love exploring the world together. For your colleagues, travelling is a fun and educational experience, so we hope you'll get excited about it too;
Proficient in MS Office;
Knowledge of either of the following automation technologies is required:
Rockwell; Studio 5000, FTview,…
Siemens; Step7, TIA Portal, WinCC, PCS7,…
Knowledge of the following is beneficial but not required:
Schneider; EcoStruxure Control Expert and Operator Terminal Expert,…
Networks; ProfiNet, Ethernet-IP, Profibus, DeviceNet, ControlNet,…

Why Contec?

Be a part of the Contec group

With our 9 international offices, the Contec Group has some 250 motivated specialists who would love to welcome you to their team. We have a flat organisational structure resulting in an open and transparent atmosphere. Furthermore, our employees can participate in Contec's shareholder plan and are given the chance to work on international projects within a variety of sectors.

Guidance on the job

A good balance of young talent and experienced colleagues ensure that you will receive appropriate guidance throughout your Contec career;
A training offer for further development both personally and professionally.

Work-life balance

Flexible hours: start between 07h00 & 09h30 and stop between 15h30 & 18h00;
Possibility to work from home for 1 day per week;
Flexible scheduling of days off, your needs are taken into account by your supervisor.

A salary package with the following additional benefits

Private medical care including travel insurance;
Possibility of having a Multisport sports card;
Opportunity to own a company car with fuel card for private use (depending on position, after 1 year of service);
SIM card and subscription;
Possibility to join an attractive pension plan after 1 year of work.

Almost convinced? Read here what our colleagues think about working within Contec:

https://contec-ias.com/jobs/#testimonials

Ready to say YES to new adventures? Apply quickly, or send us your CV via recruitment@contec-ias.com

Not your thing, but do you know the ideal person for this job? Feel free to share the vacancy via our social media channels or via email.

Back

Apply

Back

Associate Automation Engineer region Lille - North of France

Dury, France

Employee

Partial Remote Job

France

We probably don't need to tell you that automation is the future. At Contec, we make it our mission to make industrial processes future-proof. We are in full growth and therefore constantly looking for new colleagues. Are you ready to build the factory of the future with us?

For our Manufacturing Control team, which is mainly occupied with PLC programming and visualization, we are currently looking for an Automation Engineer with a passion for automation.

Projects from A-Z, this is how we do it!

At Contec we realize projects from A to Z. As an Automation Engineer you are not only responsible for the technical aspect: communication with the customer and the start-up of a wide range of projects are also part of your duties.

You work out a functional analysis (FDS) in which you analyze the client's assignment (URD) and find the most optimal solution for this.
Then you get to work with the PLC programming and visualization (HMI interfaces). For this you use the customer's standard or our own Contec Software Standard.
You also ensure the connection and data exchange of the PLCs with parent systems. This in collaboration with the MOM / MES department.
After preparation and internal tests at the office, we simulate everything together with the customer during a FAT. They are invited to our offices for this, but it can just as easily be done via remote sessions.
Then you go on site at the customer to test your work in reality (SAT) and fine-tune it.
A DDS, drawing up manuals and training for operators and technicians are also part of the job description.
If the customer wishes, we also provide aftercare for the services we provided them.

You always do all this in close collaboration with your project coordinator and your team.

Passion for automation? We’re looking for you!

You recently graduated in Engineering (preferably in Electromechanics) or you are equivalent through experience
You are an initiator and autonomous working does not deter you.
Working in a team? Yes please! Friends describe you as a real team player.
You are a problem-solver and you think proactively about projects.
You are an adventurer: learning new things and discovering the world together is what you want! At Contec, traveling is part of it, so it is important that you are open to this.
By preference, you have knowledge of the following technologies:
Rockwell; RSLogix, FTview, ...
Siemens; Step7, TIA Portal, WinCC, PCS7, ...
Schneider; Ecostruxure Control Expert, Vijeo Designer, ...
Networks; ProfiNet, Ethernet-IP, Profibus, DeviceNet, ControlNet, ...

Why Contec?

At Contec we attach great importance to you feeling part of the Contec family. With our 8 offices in 5 different countries, the Contec group has about 240 motivated specialists who are happy to welcome you to their team. We have a flat organizational structure, creating an open and transparent atmosphere. A survey among our colleagues showed that they attach great importance to the following benefits:

International: with offices and clients in different countries, the world is our playground. Are you an adventurer who likes to go abroad? At Contec it’s part of the job!
Challenging projects: we work with different clients in different sectors, which makes your job very varied and every day is a new adventure.
Work-life: flexibility in both directions is important: at Contec you have both flexible and gliding hours.
Growing together: in addition to a tailor-made onboarding process, we think it is important to invest in our people. How your career progresses largely depends on your interests.
Cooperative: at Contec, every employee has the opportunity to buy shares. As a result, we not only work together towards a common goal, but we also strengthen the group feeling. Our party committee even goes a step further by organizing the craziest activities!

Contec employees are also offered insurances, meal vouchers, laptop, an extensive training offer etc.

Almost convinced? Read here what our colleagues think about working within Contec: https://contec-ias.com/jobs/#testimonials

Ready to say YES to new adventures? Apply quickly, or send us your CV via recruitment@contec-ias.com

Not your thing, but do you know the ideal person for this job? Feel free to share the vacancy via our social media channels or via email.

Back

Apply

Back

Associate Electrical Engineer (E&I) Antwerp

Antwerpen, Belgium

Employee

Option for/Allows Remote Job

Antwerp

We probably don't need to tell you that automation is the future. At Contec, we make it our mission to make industrial processes future-proof. We are in full growth and therefore constantly looking for new colleagues. Are you ready to build the factory of the future with us?

For our E&I team, we are currently looking for an Electrical Engineer with a passion for industrial engineering and design.

Projects from A-Z, this is how we do it!

At Contec we realize projects from A to Z. As an Electrical Engineer you will be involved in our current projects. You are responsible for the following matters, among others:

Designing of schematics, cabinet layouts and component selection in accordance with customer specifications and legal requirements;
Supervision of projects according to the agreed scope and planning;
Assistance during factory acceptance tests (FAT), field testing, commissioning & start-ups;
Compiling the required documentation needed to meet project milestones;
Liaising with the project team and clients to complete the project as required.
You attend follow-up meetings with the client. You ensure that you are always well prepared for these and report afterwards so that internal and external parties are constantly informed of the project progress.

You always do all this in close collaboration with your project coordinator and your team.

Passion for automation? It’s you we’re looking for!

You’ve obtained a bachelor’s/master’s degree in industrial engineering, preferably in Electrical Engineering or Electromechanics, or you are equivalent through experience;
Can work both autonomously and as part of a team;
Proactive and logical approach to problem-solving;
You have a drivers license;
You speak and write English fluently;
Have an adventurous spirit; you enjoy learning new things and love exploring the world together. For your colleagues, travelling is a fun and educational experience, so we hope you'll get excited about it too.
Knowledge of the following is beneficial:
- Cable calculations
- Selection of electrical components
- Knowledge of legal standards and guidelines such as AREI, EN60204.1, etc.
- Eplan P8
- Instrumentation & measurement and control technology
- General business automation
- MS Office, preferably including MS Access

Why Contec?

Be a part of the Contec group

With our 9 international offices, the Contec Group has some 250 motivated specialists who would love to welcome you to their team. We have a flat organisational structure resulting in an open and transparent atmosphere. Furthermore, our employees can participate in Contec's shareholder plan and are given the chance to work on international projects within a variety of sectors.

Guidance on the job

A good balance of young talent and experienced colleagues ensure that you will receive appropriate guidance throughout your Contec career;
A training offer for further development both personally and professionally.

Work-life balance

Flexible hours: start between 07h00 & 09h30 and stop between 15h30 & 18h00;
Glide hours;
Possibility to work from home (1 day/week);
20 legal holidays, 12 ADV days and the option to buy up to 5 additional holidays through our cafeteria plan.

A salary package with the following additional benefits

Meal vouchers;
Group and hospitalisation insurance, insurance guaranteed income;
Possibility of company car with fuel card (depending on position);
Mobile phone subscription;
Cafeteria plan.

Almost convinced? Read here what our colleagues think about working within Contec:

https://contec-ias.com/jobs/#testimonials

Ready to say YES to new adventures? Apply quickly, or send us your CV via recruitment@contec-ias.com

Not your thing, but do you know the ideal person for this job? Feel free to share the vacancy via our social media channels or via email.

Back

Apply

Back

Associate Electrical Engineer (E&I) North of France

Dury, France

Employee

Option for/Allows Remote Job

France

We probably don't need to tell you that automation is the future. At Contec, we make it our mission to make industrial processes future-proof. We are in full growth and therefore constantly looking for new colleagues. Are you ready to build the factory of the future with us?

For our E&I team, we are currently looking for an Electrical Engineer with a passion for industrial engineering and design.

Projects from A-Z, this is how we do it!

At Contec we realize projects from A to Z. As an Electrical Engineer you will be involved in our current projects. You are responsible for the following matters, among others:

Designing of schematics, cabinet layouts and component selection in accordance with customer specifications and legal requirements;
Supervision of projects according to the agreed scope and planning;
Assistance during factory acceptance tests (FAT), field testing, commissioning & start-ups;
Compiling the required documentation needed to meet project milestones;
Liaising with the project team and clients to complete the project as required.
You attend follow-up meetings with the client. You ensure that you are always well prepared for these and report afterwards so that internal and external parties are constantly informed of the project progress.

You always do all this in close collaboration with your project coordinator and your team.

Passion for automation? We're looking for you!

You’ve obtained a bachelor’s/master’s degree in industrial engineering, preferably in Electrical Engineering or Electromechanics, or you are equivalent through experience;
Can work both autonomously and as part of a team;
Proactive and logical approach to problem-solving;
You have a drivers license;
You speak and write English fluently and preferably apply in English;
Have an adventurous spirit; you enjoy learning new things and love exploring the world together. For your colleagues, travelling is a fun and educational experience, so we hope you'll get excited about it too.
Knowledge of the following is beneficial:
- Cable calculations
- Selection of electrical components
- Knowledge of legal standards and guidelines such as AREI, EN60204.1, etc.
- Eplan P8
- Instrumentation & measurement and control technology
- General business automation
- MS Office, preferably including MS Access

Why Contec?

Be a part of the Contec group

With our 9 international offices, the Contec Group has some 250 motivated specialists who would love to welcome you to their team. We have a flat organisational structure resulting in an open and transparent atmosphere. Furthermore, our employees can participate in Contec's shareholder plan and are given the chance to work on international projects within a variety of sectors.

Guidance on the job

A good balance of young talent and experienced colleagues ensure that you will receive appropriate guidance throughout your Contec career;
A training offer for further development both personally and professionally.

Work-life balance

Flexible hours: start between 07h00 & 09h30 and stop between 15h30 & 18h00;
Glide hours;
Possibility to work from home; (max. 2 days/week);
25 legal holidays, 25 RTT days.

A salary package with the following additional benefits

Meal vouchers from 8 euros a day:
Possibility of a company car with fuel card (depending on job position);
Mobile phone subscription;
A laptop for professional use;
Travel allowance.

Almost convinced? Read here what our colleagues think about working within Contec:

https://contec-ias.com/jobs/#testimonials

Ready to say YES to new adventures? Apply quickly, or send us your CV via recruitment@contec-ias.com

Not your thing, but do you know the ideal person for this job? Feel free to share the vacancy via our social media channels or via email.

Back

Apply

Back

Automation Engineer Amiens

Dury, France

Employee

France

We probably don't need to tell you that automation is the future. At Contec, we make it our mission to make industrial processes future-proof. We are in full growth and therefore constantly looking for new colleagues. Are you ready to build the factory of the future with us?

For our Manufacturing Control team, which is mainly occupied with PLC programming and visualization, we are currently looking for an Automation Engineer with a passion for automation.

Projects from A-Z, this is how we do it!

At Contec we realize projects from A to Z. As an Automation Engineer you are not only responsible for the technical aspect: communication with the customer and the start-up of a wide range of projects are also part of your duties.

You work out a functional analysis (FDS) in which you analyze the client's assignment (URD) and find the most optimal solution to meeting these requirements;
Develop the PLC programming and visualization (HMI interfaces) as per your approved FDS. This could be by the clients standard or Contec own standards;.
Ensure the connection and data exchange of the PLCs with parent systems in collaboration with our MOM/MES department;
Preparation and internal office simulation with clients (FAT). Clients are invited to our office or remotely to participate;
Commissioning and start-up on site to test your work in reality (SAT) and fine-tune it;
Compiling the required documentation needed to meet project milestones. FDS, Operator/training manuals, etc;
Provide aftercare support as required by the project;
Liaising with the project team and clients to complete the projects as required.

You always do all this in close collaboration with your project coordinator and your team.

Passion for automation? It's you we're looking for!

A Bachelors' or Masters' degree in Electrical Engineering, option Automation & Control Systems, or are equivalent by experience;
In possession of a driving license;
Speak and write fluently English and preferably apply in English;
Can work both autonomously and as part of a team;
Proactive and logical approach to problem-solving;
Have an adventurous spirit; you enjoy learning new things and love exploring the world together. For your colleagues, travelling is a fun and educational experience, so we hope you'll get excited about it too.
Proficient in MS Office;
Knowledge of either of the following automation technologies is required:
- Rockwell; Studio 5000, FTview,…
- Siemens; Step7, TIA Portal, WinCC, PCS7,…
Knowledge of the following is beneficial but not required:
- Schneider; EcoStruxure Control Expert and Operator Terminal Expert,…
- Networks; ProfiNet, Ethernet-IP, Profibus, DeviceNet, ControlNet,…

Why Contec?

Be a part of the Contec group

With our 9 international offices, the Contec Group has some 250 motivated specialists who would love to welcome you to their team. We have a flat organisational structure resulting in an open and transparent atmosphere. Furthermore, our employees can participate in Contec's shareholder plan and are given the chance to work on international projects within a variety of sectors.

Guidance on the job

A good balance of young talent and experienced colleagues ensure that you will receive appropriate guidance throughout your career at Contec;
A training offer for further development both personally and professionally.

Work-life balance

Flexible hours: start between 07h00 & 09h30 and stop between 15h30 & 18h00;
Glide hours;
Possibility to work from home (1 day/week);
25 legal holidays, 25 RTT days.

A salary package with the following additional benefits

Meal vouchers from 8 euros a day:
Possibility of a company car with fuel card (depending on job position);
Mobile phone subscription;
A laptop for professional use;
Travel allowance.

Almost convinced? Read here what our colleagues think about working within Contec:

https://contec-ias.com/jobs/#testimonials

Ready to say YES to new adventures? Apply quickly, or send us your CV via recruitment@contec-ias.com

Not your thing, but do you know the ideal person for this job? Feel free to share the vacancy via our social media channels or via email.

Back

Apply

Back

Automation Engineer Liverpool

Newcastle Upon Tyne, United Kingdom

Employee

100% Remote Job / Full Remote

United Kingdom

We probably don't need to tell you that automation is the future. At Contec, we make it our mission to make industrial processes future-proof. We are in full growth and therefore constantly looking for new colleagues. Are you ready to build the factory of the future with us?

For our Manufacturing Control team, which is mainly occupied with PLC programming and visualization, we are currently looking for an experienced Automation Engineer with a passion for automation. You will mainly supporting our clients in the Liverpool area and work remotely or on site.

Projects from A-Z, this is how we do it!

At Contec we realize projects from A to Z. As an Automation Engineer you are not only responsible for the technical aspect: communication with the customer and the start-up of a wide range of projects are also part of your duties.

Develop a function design specification (FDS) in which you analyse the client's assignment (URD) and find the most optimal solution to meeting these requirements;
Develop the PLC programming and visualization (HMI interfaces) as per your approved FDS. This could be by the clients standard or Contec own standards;
Ensure the connection and data exchange of the PLCs with parent systems in collaboration with our MOM / MES department;
Preparation and internal office simulation with clients (FAT). Clients are invited to our office or remotely to participate;
Commissioning and start-up on site to test your work in reality (SAT) and fine-tune it;
Compiling the required documentation needed to meet project milestones. FDS, Operator/training manuals, etc;
Provide aftercare support as required by the project;
Liaising with the project team and clients to complete the project as required.

You always do all this in close collaboration with your project coordinator and your team.

Passion for automation? It’s you we’re looking for!

A Bachelors' or Masters' degree in Electrical Engineering, option Automation & Control Systems, or equivalent by experience;
A couple of years of relevant experience;
In possession of a driving license & located nearby Liverpool;
Can work both autonomously and as part of a team;
Proactive and logical approach to problem-solving;
Have an adventurous spirit; you enjoy learning new things and love exploring the world together. For your colleagues, travelling is a fun and educational experience, so we hope you'll get excited about it too. Your onboarding will take place in our HQ in Belgium or at our Newcastle office;
Proficient in MS Office;
Knowledge of the following automation technology is required:
- Siemens; Step7, TIA Portal, WinCC, PCS7,…
Knowledge of the following is beneficial but not required:
- Schneider; EcoStruxure Control Expert and Operator Terminal Expert,…
- Networks; ProfiNet, Ethernet-IP, Profibus, DeviceNet, ControlNet,…

Why Contec?

Be a part of the Contec group

With our 9 international offices, the Contec Group has some 250 motivated specialists who would love to welcome you to their team. We have a flat organisational structure resulting in an open and transparent atmosphere. Furthermore, our employees can participate in Contec's shareholder plan and are given the chance to work on international projects within a variety of sectors.

Guidance on the job:

A good balance of young talent and experienced colleagues ensure that you will receive appropriate guidance throughout your career at Contec;
A training offer for further development both personally and professionally.

Work-life balance:

Flexible hours: start between 07h00 & 09h30 and stop between 15h30 & 18h00;
Glide hours;
20 legal holidays, bank holidays & 2 company days;
3 additional company days after 2 years of employment;
Seniority leave as of 10 years of employment: 1 additional day each 5 year (up to a maximum of 4 additional days).

A salary package with the following additional benefits:

Monthly car allowance;
Working from home allowance;
Travel allowances;
Private health insurance;
Pension plan;
A laptop, mobile phone and subscription for business use.

Almost convinced? Read here what our colleagues think about working within Contec: https://contec-ias.com/jobs/#testimonials

Ready to say YES to new adventures? Apply quickly, or send us your CV via recruitment@contec-ias.com

Not your thing, but do you know the ideal person for this job? Feel free to share the vacancy via our social media channels

Back

Apply

Back

Automation Engineer Newcastle with experience

Newcastle Upon Tyne, United Kingdom

Employee

Partial Remote Job

United Kingdom

We probably don't need to tell you that automation is the future. At Contec, we make it our mission to make industrial processes future-proof. We are in full growth and therefore constantly looking for new colleagues. Are you ready to build the factory of the future with us?

For our Manufacturing Control team, which is mainly occupied with PLC programming and visualization, we are currently looking for an Experienced Automation Engineer with a passion for automation.

Projects from A-Z, this is how we do it!

At Contec we realize projects from A to Z. As an Automation Engineer you are not only responsible for the technical aspect: communication with the customer and the start-up of a wide range of projects are also part of your duties.

Develop a function design specification (FDS) in which you analyse the client's assignment (URD) and find the most optimal solution to meeting these requirements;
Develop the PLC programming and visualization (HMI interfaces) as per your approved FDS. This could be by the clients standard or Contec own standards;
Ensure the connection and data exchange of the PLCs with parent systems in collaboration with our MOM / MES department;
Preparation and internal office simulation with clients (FAT). Clients are invited to our office or remotely to participate;
Commissioning and start-up on site to test your work in reality (SAT) and fine-tune it;
Compiling the required documentation needed to meet project milestones. FDS, Operator/training manuals, etc;
Provide aftercare support as required by the project;
Liaising with the project team and clients to complete the project as required.

You always do all this in close collaboration with your project coordinator and your team.

Passion for automation? It’s you we’re looking for!

A Bachelors' or Masters' degree in Electrical Engineering, option Automation & Control Systems, or are equivalent by experience;
Min. 2 or 3 years' of experience in PLC programming;
In possession of a driving license & located nearby Newcastle;
Can work both autonomously and as part of a team;
Proactive and logical approach to problem-solving;
Have an adventurous spirit; you enjoy learning new things and love exploring the world together. For your colleagues, travelling is a fun and educational experience, so we hope you'll get excited about it too. Your onboarding will take place in our HQ in Belgium;
Proficient in MS Office;
Knowledge of either of the following automation technologies is required:
- Rockwell; Studio 5000, FTview,…
- Siemens; Step7, TIA Portal, WinCC, PCS7,…
Knowledge of the following is beneficial but not required:
- Schneider; EcoStruxure Control Expert and Operator Terminal Expert,…
- Networks; ProfiNet, Ethernet-IP, Profibus, DeviceNet, ControlNet,…

Why Contec?

Be a part of the Contec group

With our 9 international offices, the Contec Group has some 250 motivated specialists who would love to welcome you to their team. We have a flat organisational structure resulting in an open and transparent atmosphere. Furthermore, our employees can participate in Contec's shareholder plan and are given the chance to work on international projects within a variety of sectors.

Guidance on the job:

A good balance of young talent and experienced colleagues ensure that you will receive appropriate guidance throughout your career at Contec;
A training offer for further development both personally and professionally.

Work-life balance:

Flexible hours: start between 07h00 & 09h30 and stop between 15h30 & 18h00;
Glide hours;
Possibility to work from home;
20 legal holidays, bank holidays & 2 company days;
3 additional company days after 2 years of employment;
Seniority leave as of 10 years of employment: 1 additional day each 5 year (up to a maximum of 4 additional days).

A salary package with the following additional benefits:

Monthly car allowance;
Working from home allowance;
Travel allowances;
Private health insurance;
Pension plan;
A laptop, mobile phone and subscription for business use.

Almost convinced? Read here what our colleagues think about working within Contec: https://contec-ias.com/jobs/#testimonials

Ready to say YES to new adventures? Apply quickly, or send us your CV via recruitment@contec-ias.com

Not your thing, but do you know the ideal person for this job? Feel free to share the vacancy via our social media channels or via email.

Back

Apply

Back

Business Area Sales Manager Lodz

Lodz, Poland

Employee

Option for/Allows Remote Job

Poland

At Contec, we make it our mission to make industrial processes future-proof. We are in full growth and therefore constantly looking for new colleagues. Are you ready to build the factory of the future with us?

To expand our Sales team, we are looking for a Business Area Sales Manager/Engineer in Poland.

Your responsibilities

Responsible for the sales results of a particular geographic area or industry sector;
Responsible for the follow-up of existing clients and the development of optimal customer relationships;
Responsible for the further strategic development of new customers and ecosystems;
Be able to conduct direct negotiations with end customers regarding new/current quotations and contracts;
Verify incoming orders and organize the required internal and/or external kick-off meetings;
Provide feedback and input regarding marketing activities, possible trade fair participation, etc.;
Participate and take responsibility in the entire sales process of the Contec group;
Provide input regarding the improvement of business processes and resources;
Responsible for the timely elaboration of tailor-made quotations for the automation projects that are imminent at our customers.
Able to read and interpret specifications;
Remaining contact with potential suppliers regarding prices and technical specifications;
For detailed questions outside (and inside) your own specialization, you can fall back on the project engineers of the various departments.

Passion for automation? It’s you we’re looking for!

You have a degree in a technical field or equivalent through experience;
You have a thorough knowledge of one or more branches within industrial automation;
You can work autonomously as well as in a team;
Thinking analytically and working accurately are no problem for you;
You enjoy working on projects on a conceptual basis;
You are communicative and enjoy contacting customers, suppliers or colleagues to gather sufficient information to make a competitive offer;
You are stress-resistant and strong in organising your work. You set priorities and respect deadlines;
You are fluent in Polish and English;
You are in possession of a driving licence B;
You are fluent in MS Office (Excel, Word, PowerPoint).

Why Contec?

Be a part of the Contec group

With our 9 international offices, the Contec Group has some 250 motivated specialists who would love to welcome you to their team. We have a flat organisational structure resulting in an open and transparent atmosphere. Furthermore, our employees can participate in Contec's shareholder plan and are given the chance to work on international projects within a variety of sectors.

Guidance on the job

A good balance of young talent and experienced colleagues ensure that you will receive appropriate guidance throughout your Contec career;
A training offer for further development both personally and professionally.

Work-life balance

Flexible hours: start between 07h00 & 09h30 and stop between 15h30 & 18h00;
Possibility to work from home for 1 day per week;
Flexible scheduling of days off, your needs are taken into account by your supervisor.

A salary package with the following additional benefits

Private medical care including travel insurance;
Possibility of having a Multisport sports card;
Opportunity to own a company car with fuel card for private use (depending on position, after 1 year of service);
SIM card and subscription;
Possibility to join an attractive pension plan after 1 year of work.

Almost convinced? Read here what our colleagues think about working within Contec:

https://contec-ias.com/jobs/#testimonials

Ready to say YES to new adventures? Apply quickly, or send us your CV via recruitment@contec-ias.com

Not your thing, but do you know the ideal person for this job? Feel free to share the vacancy via our social media channels or via email.

Back

Apply

Back

E&I Designer Antwerp

Antwerpen, Belgium

Employee

Partial Remote Job

Antwerp

We probably don't need to tell you that automation is the future. At Contec, we make it our mission to make industrial processes future-proof. We are in full growth and therefore constantly looking for new colleagues. Are you ready to build the factory of the future with us?

For our E&I team, we are currently looking for an E&I Designer with a passion for industrial engineering and design.

Projects from A-Z, this is how we do it!

You are responsible for preparing the following required design documents:

Block diagrams;
Overall wiring diagrams;
Cable lists (electrical and instrumentation);
Design & routing of main cable paths (electrical and instrumentation);
I/O list with I/O allocation;
Design of low voltage panels (MCC, low voltage distribution boards LVDB): lay-out, equipment lists, terminal lists;
Local panels with lay-out, equipment lists and terminal lists;
Instrument panels with lay-out, marshalling, equipment lists and terminal lists.

Passion for automation? It’s you we’re looking for!

You have at least a Bachelor’s degree in a technical subject, preferably in Electromechanics, or have equivalent experience;
Can work both autonomously and as part of a team;
Proactive and logical approach to problem-solving;
You have a drivers license;
You speak and write English fluently;
Have an adventurous spirit; you enjoy learning new things and love exploring the world together. For your colleagues, travelling is a fun and educational experience, so we hope you'll get excited about it too.
Knowledge of the following is beneficial:
- CAD systems
- Eplan P8
- MS Office, preferably including MS Access

Why Contec?

Be a part of the Contec group

With our 9 international offices, the Contec Group has some 250 motivated specialists who would love to welcome you to their team. We have a flat organisational structure resulting in an open and transparent atmosphere. Furthermore, our employees can participate in Contec's shareholder plan and are given the chance to work on international projects within a variety of sectors.

Guidance on the job

A good balance of young talent and experienced colleagues ensure that you will receive appropriate guidance throughout your Contec career;
A training offer for further development both personally and professionally.

Work-life balance

Flexible hours: start between 07h00 & 09h30 and stop between 15h30 & 18h00;
Glide hours;
Possibility to work from home (1 day/week);
20 legal holidays, 12 ADV days and the option to buy up to 5 additional holidays through our cafeteria plan.

A salary package with the following additional benefits

Meal vouchers;
Group and hospitalisation insurance, insurance guaranteed income;
Possibility of company car with fuel card (depending on position);
Mobile phone subscription;
Cafeteria plan.

Almost convinced? Read here what our colleagues think about working within Contec:

https://contec-ias.com/jobs/#testimonials

Ready to say YES to new adventures? Apply quickly, or send us your CV via recruitment@contec-ias.com

Not your thing, but do you know the ideal person for this job? Feel free to share the vacancy via our social media channels or via email.

Back

Apply

Back

Electrical & Instrumentation Designer Hasselt

Hasselt, Belgium

Employee

Option for/Allows Remote Job

Hasselt

We probably don't need to tell you that automation is the future. At Contec, we make it our mission to make industrial processes future-proof. We are in full growth and therefore constantly looking for new colleagues. Are you ready to build the factory of the future with us?

For our E&I team, we are currently looking for an E&I Designer with a passion for industrial engineering and design.

Projects from A-Z, this is how we do it!

You are responsible for preparing the following required design documents:

Block diagrams;
Overall wiring diagrams;
Cable lists (electrical and instrumentation);
Design & routing of main cable paths (electrical and instrumentation);
I/O list with I/O allocation;
Design of low voltage panels (MCC, low voltage distribution boards LVDB): lay-out, equipment lists, terminal lists;
Local panels with lay-out, equipment lists and terminal lists;
Instrument panels with lay-out, marshalling, equipment lists and terminal lists.

Passion for automation? It’s you we’re looking for!

You have at least a Bachelor’s degree in a technical subject, preferably in Electromechanics, or have equivalent experience;
Can work both autonomously and as part of a team;
Proactive and logical approach to problem-solving;
You have a drivers license;
You speak and write English fluently;
Have an adventurous spirit; you enjoy learning new things and love exploring the world together. For your colleagues, travelling is a fun and educational experience, so we hope you'll get excited about it too.
Knowledge of the following is beneficial:
- CAD systems
- Eplan P8
- MS Office, preferably including MS Access

Why Contec?

Be a part of the Contec group

With our 9 international offices, the Contec Group has some 250 motivated specialists who would love to welcome you to their team. We have a flat organisational structure resulting in an open and transparent atmosphere. Furthermore, our employees can participate in Contec's shareholder plan and are given the chance to work on international projects within a variety of sectors.

Guidance on the job

A good balance of young talent and experienced colleagues ensure that you will receive appropriate guidance throughout your Contec career;
A training offer for further development both personally and professionally.

Work-life balance

Flexible hours: start between 07h00 & 09h30 and stop between 15h30 & 18h00;
Glide hours;
Possibility to work from home (1 day/week);
20 legal holidays, 12 ADV days and the option to buy up to 5 additional holidays through our cafeteria plan.

A salary package with the following additional benefits

Meal vouchers;
Group and hospitalisation insurance, insurance guaranteed income;
Possibility of company car with fuel card (depending on position);
Mobile phone subscription;
Cafeteria plan.

Almost convinced? Read here what our colleagues think about working within Contec:

https://contec-ias.com/jobs/#testimonials

Ready to say YES to new adventures? Apply quickly, or send us your CV via recruitment@contec-ias.com

Not your thing, but do you know the ideal person for this job? Feel free to share the vacancy via our social media channels or via email.

Back

Apply

Back

Junior Automation Engineer Greensboro

Greensboro, United States of America

Employee

Option for/Allows Remote Job

USA

We probably don't need to tell you that automation is the future. At Contec, we make it our mission to make industrial processes future-proof. We are in full growth and therefore constantly looking for new colleagues. Are you ready to build the factory of the future with us?

For our Manufacturing Control team, which is mainly occupied with PLC programming and visualization, we are currently looking for an Automation Engineer with a passion for automation.

Projects from A-Z, this is how we do it!

At Contec we realize projects from A to Z. As an Automation Engineer you are not only responsible for the technical aspect: communication with the customer and the start-up of a wide range of projects are also part of your duties.

Develop a function design specification (FDS) in which you analyze the client's assignment (URD) and find the most optimal solution to meeting these requirements;
Develop the PLC programming and visualization (HMI interfaces) as per your approved FDS. This could be by the clients standard or Contec own standards;
Ensure the connection and data exchange of the PLCs with parent systems in collaboration with our MOM / MES department;
Preparation and internal office simulation with clients (FAT). Clients are invited to our office or remotely to participate;
Commissioning and start-up on site to test your work in reality (SAT) and fine-tune it;
Compiling the required documentation needed to meet project milestones. FDS, Operator/training manuals, etc;
Provide aftercare support as required by the project;
Liaising with the project team and clients to complete the project as required.

You always do all this in close collaboration with your project coordinator and your team.

Passion for automation? If so, it’s you we’re looking for!

You have a bachelor’s or master’s degree Industrial Automation, preferably Electrical Engineering or Electromechanics (or you hvae equivalent work experience;
A first work experience in automation engineering is a plus;
You have a valid driver’s license;
You speak and write English fluently;
Can work both autonomously and as part of a team;
You take a proactive and logical approach to problem-solving;
Have an adventurous spirit; you enjoy learning new things and love exploring the world together. For your colleagues, travelling is a fun and educational experience, so we hope you'll get excited about it too;
Proficient in MS Office;
Knowledge of at least one of the following automation technologies is required:
- Rockwell; Studio 5000, FTview,…
- Siemens; Step7, TIA Portal, WinCC, PCS7,…
Knowledge of the following is beneficial but not required:
- Schneider; EcoStruxure Control Expert and Operator Terminal Expert,…
- Networks; ProfiNet, Ethernet-IP, Profibus, DeviceNet, ControlNet,…

Why Contec?

Be a part of the Contec group

With our 9 international offices, the Contec Group has some 250 motivated specialists who would love to welcome you to their team. We have a flat organizational structure resulting in an open and transparent atmosphere. Furthermore, our employees can participate in Contec's shareholder plan and are given the chance to work on international projects within a variety of sectors.

Guidance on the job

A good balance of young talent and experienced colleagues ensures that you will receive appropriate guidance throughout your Contec career;
A training package for further development both personally and professionally.

Work-life balance

Flexible hours with options to start between 7:00am & 09:30am and stop between 3:30pm & 6:00pm;
Possibility to work from home (1 day/week);
15-20 days of PTO (depending on your function), 9 company holidays + up to 12 days of additional time off using accrued glide time.

A salary package with the following additional benefits

Healthcare;
Company shareholder program.

Almost convinced? Read here what our colleagues think about working within Contec:

https://contec-ias.com/jobs/#testimonials

Ready to say YES to new adventures? Apply quickly, or send us your CV via recruitment@contec-ias.com

Not your thing, but do you know the ideal person for this job? Feel free to share the vacancy via our social media channels or via email.

Back

Apply

Back

Junior Automation Engineer Hasselt

Hasselt, Belgium

Employee

Option for/Allows Remote Job

Hasselt

We probably don't need to tell you that automation is the future. At Contec, we make it our mission to make industrial processes future-proof. We are in full growth and therefore constantly looking for new colleagues. Are you ready to build the factory of the future with us?

For our Manufacturing Control team, which is mainly occupied with PLC programming and visualization, we are currently looking for an Automation Engineer with a passion for automation.

Projects from A-Z, this is how we do it!

At Contec we realize projects from A to Z. As an Automation Engineer you are not only responsible for the technical aspect: communication with the customer and the start-up of a wide range of projects are also part of your duties.

Develop a function design specification (FDS) in which you analyse the client's assignment (URD) and find the most optimal solution to meeting these requirements;
Develop the PLC programming and visualization (HMI interfaces) as per your approved FDS. This could be by the clients standard or Contec own standards;
Ensure the connection and data exchange of the PLCs with parent systems in collaboration with our MOM / MES department;
Preparation and internal office simulation with clients (FAT). Clients are invited to our office or remotely to participate;
Commissioning and start-up on site to test your work in reality (SAT) and fine-tune it;
Compiling the required documentation needed to meet project milestones. FDS, Operator/training manuals, etc;
Provide aftercare support as required by the project;
Liaising with the project team and clients to complete the project as required.

You always do all this in close collaboration with your project coordinator and your team.

Passion for automation? It’s you we’re looking for!

You have a bachelor’s or master’s degree Industrial Automation, preferably Electrical Engineering or Electromechanics, or you are equivalent through experience;
You have a driver’s license;
You speak and write English fluently;
Can work both autonomously and as part of a team;
Proactive and logical approach to problem-solving;
Have an adventurous spirit; you enjoy learning new things and love exploring the world together. For your colleagues, travelling is a fun and educational experience, so we hope you'll get excited about it too;
Proficient in MS Office;
Knowledge of either of the following automation technologies is required:
- Rockwell; Studio 5000, FTview,…
- Siemens; Step7, TIA Portal, WinCC, PCS7,…
Knowledge of the following is beneficial but not required:
- Schneider; EcoStruxure Control Expert and Operator Terminal Expert,…
- Networks; ProfiNet, Ethernet-IP, Profibus, DeviceNet, ControlNet,…

Why Contec?

Be a part of the Contec group

With our 9 international offices, the Contec Group has some 250 motivated specialists who would love to welcome you to their team. We have a flat organisational structure resulting in an open and transparent atmosphere. Furthermore, our employees can participate in Contec's shareholder plan and are given the chance to work on international projects within a variety of sectors.

Guidance on the job

A good balance of young talent and experienced colleagues ensure that you will receive appropriate guidance throughout your Contec career;
A training offer for further development both personally and professionally.

Work-life balance

Flexible hours: start between 07h00 & 09h30 and stop between 15h30 & 18h00;
Glide hours;
Possibility to work from home (1da/week);
20 legal holidays, 12 ADV days and the option to buy up to 5 additional holidays through our cafeteria plan.

A salary package with the following additional benefits

Meal vouchers;
Group and hospitalisation insurance, insurance guaranteed income;
Possibility of company car with fuel card (depending on position);
Mobile phone subscription;
Cafeteria plan.

Almost convinced? Read here what our colleagues think about working within Contec:

https://contec-ias.com/jobs/#testimonials

Ready to say YES to new adventures? Apply quickly, or send us your CV via recruitment@contec-ias.com

Not your thing, but do you know the ideal person for this job? Feel free to share the vacancy via our social media channels or via email.

Back

Apply

Back

Junior Automation Engineer Kortrijk

Kortrijk, Belgium

Employee

Option for/Allows Remote Job

Kortrijk

We probably don't need to tell you that automation is the future. At Contec, we make it our mission to make industrial processes future-proof. We are in full growth and therefore constantly looking for new colleagues. Are you ready to build the factory of the future with us?

For our Manufacturing Control team, which is mainly occupied with PLC programming and visualization, we are currently looking for an Automation Engineer with a passion for automation.

Projects from A-Z, this is how we do it!

At Contec we realize projects from A to Z. As an Automation Engineer you are not only responsible for the technical aspect: communication with the customer and the start-up of a wide range of projects are also part of your duties.

Develop a function design specification (FDS) in which you analyse the client's assignment (URD) and find the most optimal solution to meeting these requirements;
Develop the PLC programming and visualization (HMI interfaces) as per your approved FDS. This could be by the clients standard or Contec own standards;
Ensure the connection and data exchange of the PLCs with parent systems in collaboration with our MOM / MES department;
Preparation and internal office simulation with clients (FAT). Clients are invited to our office or remotely to participate;
Commissioning and start-up on site to test your work in reality (SAT) and fine-tune it;
Compiling the required documentation needed to meet project milestones. FDS, Operator/training manuals, etc;
Provide aftercare support as required by the project;
Liaising with the project team and clients to complete the project as required.

You always do all this in close collaboration with your project coordinator and your team.

Passion for automation? It’s you we’re looking for!

You have a bachelor’s or master’s degree Industrial Automation, preferably Electrical Engineering or Electromechanics, or you are equivalent through experience;
You have a driver’s license;
You speak and write English fluently;
Can work both autonomously and as part of a team;
Proactive and logical approach to problem-solving;
Have an adventurous spirit; you enjoy learning new things and love exploring the world together. For your colleagues, travelling is a fun and educational experience, so we hope you'll get excited about it too;
Proficient in MS Office;
Knowledge of either of the following automation technologies is required:
- Rockwell; Studio 5000, FTview,…
- Siemens; Step7, TIA Portal, WinCC, PCS7,…
Knowledge of the following is beneficial but not required:
- Schneider; EcoStruxure Control Expert and Operator Terminal Expert,…
- Networks; ProfiNet, Ethernet-IP, Profibus, DeviceNet, ControlNet,…

Why Contec?

Be a part of the Contec group

With our nine international offices, the Contec Group has some 250 motivated specialists who would love to welcome you to their team. We have a flat organisational structure resulting in an open and transparent atmosphere. Furthermore, our employees can participate in Contec's shareholder plan and are given the chance to work on international projects within a variety of sectors.

Guidance on the job

A good balance of young talent and experienced colleagues ensure that you will receive appropriate guidance throughout your Contec career;
A training offer for further development both personally and professionally.

Work-life balance

Flexible hours: start between 07h00 & 09h30 and stop between 15h30 & 18h00;
Glide hours;
Possibility to work from home (1 day/week);
20 legal holidays, 12 ADV days and the option to buy up to 5 additional holidays through our cafeteria plan.

A salary package with the following additional benefits

Meal vouchers;
Group and hospitalisation insurance, insurance guaranteed income;
Possibility of company car with fuel card (depending on position);
Mobile phone subscription;
Cafeteria plan.

Almost convinced? Read here what our colleagues think about working within Contec:

https://contec-ias.com/jobs/#testimonials

Ready to say YES to new adventures? Apply quickly, or send us your CV via recruitment@contec-ias.com

Not your thing, but do you know the ideal person for this job? Feel free to share the vacancy via our social media channels or via email.

Back

Apply

Back

Junior Automation Engineer Łódź

Lodz, Poland

Employee

Option for/Allows Remote Job

Poland

We probably don't need to tell you that automation is the future. At Contec, we make it our mission to make industrial processes future-proof. We are in full growth and therefore constantly looking for new colleagues. Are you ready to build the factory of the future with us?

For our Manufacturing Control team, which is mainly occupied with PLC programming and visualization, we are currently looking for an Automation Engineer with a passion for automation.

Projects from A-Z, this is how we do it!

At Contec we realize projects from A to Z. As an Automation Engineer you are not only responsible for the technical aspect: communication with the customer and the start-up of a wide range of projects are also part of your duties.

Develop a function design specification (FDS) in which you analyse the client's assignment (URD) and find the most optimal solution to meeting these requirements;
Develop the PLC programming and visualization (HMI interfaces) as per your approved FDS. This could be by the clients standard or Contec own standards;
Ensure the connection and data exchange of the PLCs with parent systems in collaboration with our MOM / MES department;
Preparation and internal office simulation with clients (FAT). Clients are invited to our office or remotely to participate;
Commissioning and start-up on site to test your work in reality (SAT) and fine-tune it;
Compiling the required documentation needed to meet project milestones. FDS, Operator/training manuals, etc;
Provide aftercare support as required by the project;
Liaising with the project team and clients to complete the project as required.

You always do all this in close collaboration with your project coordinator and your team.

Passion for automation? It’s you we’re looking for!

You have a bachelor’s or master’s degree Industrial Automation, preferably Electrical Engineering or Electromechanics, or you are equivalent through experience;
You have a driver’s license;
You speak and write English fluently;
Can work both autonomously and as part of a team;
Proactive and logical approach to problem-solving;
Have an adventurous spirit; you enjoy learning new things and love exploring the world together. For your colleagues, travelling is a fun and educational experience, so we hope you'll get excited about it too;
Proficient in MS Office;
Knowledge of either of the following automation technologies is required:
Rockwell; Studio 5000, FTview,…
Siemens; Step7, TIA Portal, WinCC, PCS7,…
Knowledge of the following is beneficial but not required:
Schneider; EcoStruxure Control Expert and Operator Terminal Expert,…
Networks; ProfiNet, Ethernet-IP, Profibus, DeviceNet, ControlNet,…

Why Contec?

Be a part of the Contec group

With our 9 international offices, the Contec Group has some 250 motivated specialists who would love to welcome you to their team. We have a flat organisational structure resulting in an open and transparent atmosphere. Furthermore, our employees can participate in Contec's shareholder plan and are given the chance to work on international projects within a variety of sectors.

Guidance on the job

A good balance of young talent and experienced colleagues ensure that you will receive appropriate guidance throughout your Contec career;
A training offer for further development both personally and professionally.

Work-life balance

Flexible hours: start between 07h00 & 09h30 and stop between 15h30 & 18h00;
Possibility to work from home (max.2 days per week);
Flexible scheduling of days off, your needs are taken into account by your supervisor.

A salary package with the following additional benefits

Private medical care including travel insurance;
Possibility of having a Multisport sports card;
Opportunity to own a company car with fuel card for private use (depending on position, after 1 year of service);
SIM card and subscription;
Possibility to join an attractive pension plan after 1 year of work.

Almost convinced? Read here what our colleagues think about working within Contec:

https://contec-ias.com/jobs/#testimonials

Ready to say YES to new adventures? Apply quickly, or send us your CV via recruitment@contec-ias.com

Not your thing, but do you know the ideal person for this job? Feel free to share the vacancy via our social media channels or via email.

Back

Apply

Back

Junior Automation Engineer Newcastle

Newcastle Upon Tyne, United Kingdom

Employee

Partial Remote Job

United Kingdom

We probably don't need to tell you that automation is the future. At Contec, we make it our mission to make industrial processes future-proof. We are in full growth and therefore constantly looking for new colleagues. Are you ready to build the factory of the future with us?

For our Manufacturing Control team, which is mainly occupied with PLC programming and visualization, we are currently looking for an Automation Engineer with a passion for automation.

Projects from A-Z, this is how we do it!

At Contec we realize projects from A to Z. As an Automation Engineer you are not only responsible for the technical aspect: communication with the customer and the start-up of a wide range of projects are also part of your duties.

Develop a function design specification (FDS) in which you analyse the client's assignment (URD) and find the most optimal solution to meeting these requirements;
Develop the PLC programming and visualization (HMI interfaces) as per your approved FDS. This could be by the clients standard or Contec own standards;
Ensure the connection and data exchange of the PLCs with parent systems in collaboration with our MOM / MES department;
Preparation and internal office simulation with clients (FAT). Clients are invited to our office or remotely to participate;
Commissioning and start-up on site to test your work in reality (SAT) and fine-tune it;
Compiling the required documentation needed to meet project milestones. FDS, Operator/training manuals, etc;
Provide aftercare support as required by the project;
Liaising with the project team and clients to complete the project as required.

You always do all this in close collaboration with your project coordinator and your team.

Passion for automation? It’s you we’re looking for!

A Bachelors' or Masters' degree in Electrical Engineering, option Automation & Control Systems, or are equivalent by experience;
In possession of a driving license & located nearby Newcastle.
Can work both autonomously and as part of a team;
Proactive and logical approach to problem-solving;
Have an adventurous spirit; you enjoy learning new things and love exploring the world together. For your colleagues, travelling is a fun and educational experience, so we hope you'll get excited about it too. Your onboarding will take place in our HQ in Belgium;
Proficient in MS Office;
Knowledge of either of the following automation technologies is required:
- Rockwell; Studio 5000, FTview,…
- Siemens; Step7, TIA Portal, WinCC, PCS7,…
Knowledge of the following is beneficial but not required:
- Schneider; EcoStruxure Control Expert and Operator Terminal Expert,…
- Networks; ProfiNet, Ethernet-IP, Profibus, DeviceNet, ControlNet,…

Why Contec?

Be a part of the Contec group

With our 9 international offices, the Contec Group has some 250 motivated specialists who would love to welcome you to their team. We have a flat organisational structure resulting in an open and transparent atmosphere. Furthermore, our employees can participate in Contec's shareholder plan and are given the chance to work on international projects within a variety of sectors.

Guidance on the job:

A good balance of young talent and experienced colleagues ensure that you will receive appropriate guidance throughout your career at Contec;
A training offer for further development both personally and professionally.

Work-life balance:

Flexible hours: start between 07h00 & 09h30 and stop between 15h30 & 18h00;
Glide hours;
Possibility to work from home;
20 legal holidays, bank holidays & 2 company days;
3 additional company days after 2 years of employment;
Seniority leave as of 10 years of employment: 1 additional day each 5 year (up to a maximum of 4 additional days).

A salary package with the following additional benefits:

Monthly car allowance;
Working from home allowance;
Travel allowances;
Private health insurance;
Pension plan;
A laptop, mobile phone and subscription for business use.

Almost convinced? Read here what our colleagues think about working within Contec: https://contec-ias.com/jobs/#testimonials

Ready to say YES to new adventures? Apply quickly, or send us your CV via recruitment@contec-ias.com

Not your thing, but do you know the ideal person for this job? Feel free to share the vacancy via our social media channels

Back

Apply

Back

Junior Electrical Engineer (Task Force Mechelen)

Antwerpen, Belgium

Employee

Option for/Allows Remote Job

Antwerp

We probably don't need to tell you that automation is the future. At Contec, we make it our mission to make industrial processes future-proof. We are in full growth and therefore constantly looking for new colleagues. Are you ready to build the factory of the future with us?

For our E&I team, we are currently looking for an Electrical Engineer with a passion for industrial engineering and design.

Projects from A-Z, this is how we do it!

At Contec we realize projects from A to Z. As an Electrical Engineer you will be involved in our current projects. You are responsible for the following matters, among others:

Designing of schematics, cabinet layouts and component selection in accordance with customer specifications and legal requirements;
Supervision of projects according to the agreed scope and planning;
Assistance during factory acceptance tests (FAT), field testing, commissioning & start-ups;
Compiling the required documentation needed to meet project milestones;
Liaising with the project team and clients to complete the project as required.
You attend follow-up meetings with the client. You ensure that you are always well prepared for these and report afterwards so that internal and external parties are constantly informed of the project progress.

You always do all this in close collaboration with your project coordinator and your team.

Passion for automation? It’s you we’re looking for!

You’ve recently obtained a bachelor’s/master’s degree in industrial engineering, preferably in Electrical Engineering or Electromechanics, or you are equivalent through experience;
Can work both autonomously and as part of a team;
Proactive and logical approach to problem-solving;
You have a drivers license;
You speak and write English fluently;
Have an adventurous spirit; you enjoy learning new things and love exploring the world together. For your colleagues, travelling is a fun and educational experience, so we hope you'll get excited about it too.
Knowledge of the following is beneficial:
- Cable calculations
- Selection of electrical components
- Knowledge of legal standards and guidelines such as AREI, EN60204.1, etc.
- Eplan P8
- Instrumentation & measurement and control technology
- General business automation
- MS Office, preferably including MS Access

Why Contec?

Be a part of the Contec group

With our 9 international offices, the Contec Group has some 250 motivated specialists who would love to welcome you to their team. We have a flat organisational structure resulting in an open and transparent atmosphere. Furthermore, our employees can participate in Contec's shareholder plan and are given the chance to work on international projects within a variety of sectors.

Guidance on the job

A good balance of young talent and experienced colleagues ensure that you will receive appropriate guidance throughout your Contec career;
A training offer for further development both personally and professionally.

Work-life balance

Flexible hours: start between 07h00 & 09h30 and stop between 15h30 & 18h00;
Glide hours;
Possibility to work from home (1 day/week);
20 legal holidays, 12 ADV days and the option to buy up to 5 additional holidays through our cafeteria plan.

A salary package with the following additional benefits

Meal vouchers;
Group and hospitalisation insurance, insurance guaranteed income;
Possibility of company car with fuel card (depending on position);
Mobile phone subscription;
Cafeteria plan.

Almost convinced? Read here what our colleagues think about working within Contec:

https://contec-ias.com/jobs/#testimonials

Ready to say YES to new adventures? Apply quickly, or send us your CV via recruitment@contec-ias.com

Not your thing, but do you know the ideal person for this job? Feel free to share the vacancy via our social media channels or via email.

Back

Apply

Back

Junior Electrical Engineer Ploiești

Ploiesti, Romania

Employee

No remote work

Romania

We probably don't need to tell you that automation is the future. At Contec, we make it our mission to make industrial processes future-proof. We are in full growth and therefore constantly looking for new colleagues. Are you ready to build the factory of the future with us?

For our E&I team, we are currently looking for an Electrical Engineer with a passion for industrial engineering and design.

Projects from A-Z, this is how we do it!

At Contec we realize projects from A to Z. As an Electrical Engineer you will be involved in our current projects. You are responsible for the following matters, among others:

Designing of schematics, cabinet layouts and component selection in accordance with customer specifications and legal requirements;
Supervision of projects according to the agreed scope and planning;
Assistance during factory acceptance tests (FAT), field testing, commissioning & start-ups;
Compiling the required documentation needed to meet project milestones;
Liaising with the project team and clients to complete the project as required.
You attend follow-up meetings with the client. You ensure that you are always well prepared for these and report afterwards so that internal and external parties are constantly informed of the project progress.

You always do all this in close collaboration with your project coordinator and your team.

Passion for automation? It’s you we’re looking for!

You’ve obtained a bachelor’s/master’s degree in industrial engineering, preferably in Electrical Engineering or Electromechanics, or you are equivalent through experience;
Can work both autonomously and as part of a team;
Proactive and logical approach to problem-solving;
You have a driver’s license;
You speak and write English fluently;
Have an adventurous spirit; you enjoy learning new things and love exploring the world together. For your colleagues, travelling is a fun and educational experience, so we hope you'll get excited about it too.
Knowledge of the following is beneficial:
Cable calculations
Selection of electrical components
Knowledge of legal standards and guidelines such as AREI, EN60204.1, etc.
Eplan P8
Instrumentation & measurement and control technology
General business automation
MS Office, preferably including MS Access

Why Contec?

Be a part of the Contec group

With our 9 international offices, the Contec Group has some 250 motivated specialists who would love to welcome you to their team. We have a flat organisational structure resulting in an open and transparent atmosphere. Furthermore, our employees can participate in Contec's shareholder plan and are given the chance to work on international projects within a variety of sectors.

Guidance on the job

A good balance of young talent and experienced colleagues ensure that you will receive appropriate guidance throughout your Contec career;
A training offer for further development both personally and professionally.

Work-life balance

Flexible hours: start between 07h00 & 09h30 and stop between 15h30 & 18h00;
Glide hours;
Possibility to work from home;
21 legal holidays, plus 2 bridge days, plus days off when official holidays take place in the weekends;
Seniority leave as of 10 years of employment: 1 additional day each 5 year (up to a maximum of 4 additional days).

A salary package with the following additional benefits

Meal vouchers;
Vacation tickets;
Private pension ;
Hospitalisation insurance (partially paid for your family members);
Mobile phone subscription.

Almost convinced? Read here what our colleagues think about working within Contec:

https://contec-ias.com/jobs/#testimonials

Ready to say YES to new adventures? Apply quickly, or send us your CV via recruitment@contec-ias.com

Not your thing, but do you know the ideal person for this job? Feel free to share the vacancy via our social media channels or via email.

Back

Apply

Back

Safety Officer

Antwerpen, Belgium

Employee

Option for/Allows Remote Job

Antwerp

Dat automatisatie de toekomst is, moeten we je vast niet vertellen. Bij Contec maken we er dan ook onze missie van om industriële processen future proof te maken. We zijn in volle groei en daarom ook continu op zoek naar nieuwe collega’s. Ben jij er klaar voor om samen met ons aan de factory of the future te bouwen? Dat kan!

Ter ondersteuning van onze safety afdeling zijn we momenteel op zoek naar een preventieadviseur.

Wat zal jij zoal doen?

Bij Contec realiseren we projecten van A tot Z. In uw functie ben je verantwoordelijk voor het ondersteunen en bevorderen van onze veiligheidscultuur.

Als hands-on en leergierige collega krijg je een zeer divers takenpakket toegewezen zoals o.a. het volledige beheer van het Gezondheids- en Veiligheidsmanagementsysteem (ISO 45001) en het beheer van alle wettelijke zaken;
je draagt proactief bij aan de wettelijke taken en informeert over veranderende of nieuwe wetgeving en geeft hier toelichting aan wettelijke organen en lokaal management;
Je onderhoudt contacten met de Arbeidsgeneeskundige dienst, leveranciers en klanten.
Je zorgt voor het onthaal van nieuwe medewerkers en het beheer van de nodige PBM’s. Toolboxen uitwerken, rapporten opmaken, het beheer van veiligheidsopleidingen en het mee uitwerken van een welzijnsbeleid…Geen dag ziet er hetzelfde uit;
Je werkt hoofdzakelijk vanop kantoor maar je bent ook regelmatig on site of in één van onze buitenlandse kantoren terug te vinden;
Daarnaast sta je ook in voor de opvolging van kleine renovatie- en onderhoudswerken voor onze kantoren in België.

Wie ben jij?

Je behaalde minstens een diploma preventieadviseur niveau 2;
Je kan zowel autonoom als in teamverband werken;
Je hebt de nodige affiniteit met ‘Veiligheid’;
Je spreekt en schrijft vlot Nederlands en Engels;
Je staat sterk in je schoenen en weet op welke manieren je mensen kan aanspreken;
Je bent een initiatiefnemer en autonoom werken schrikt je niet af;
Je bent in het bezit van een rijbewijs B;
Je denkt probleemoplossend en proactief mee na.

Waarom Contec?

Maak deel uit van de Contec groep

Met onze 9 kantoren in binnen- en buitenland, telt de Contec Group zo’n 250 gemotiveerde specialisten die je graag verwelkomen in hun team. We hebben een vlakke organisatiestructuur waardoor er een open en transparante sfeer heerst. Verder hebben onze medewerkers de mogelijkheid om deel te nemen aan het aandeelhoudersplan van Contec en krijgen ze de kans om mee te werken aan internationale projecten binnen uiteenlopende sectoren.

Begeleiding on the job

Een goede mix van jong talent en ervaren collega’s zorgen ervoor dat jij gedurende je Contec carrière de gepaste begeleiding zal krijgen;
Een trainingsaanbod om je verder te ontwikkelen op zowel persoonlijk als professioneel vlak;
Wil je groeien in je vak? Dan is er een mogelijkheid om je diploma Preventieadviseur niveau 1 te behalen.

Work-life balance

Flexibele en glijdende uren: ‘s ochtends beginnen kan bij ons tussen 07u00 en 09u30;
Mogelijkheid tot thuiswerk (max 1 dag/week);
20 wettelijke vakantiedagen, 12 ADV dagen en de mogelijkheid om tot max. 5 vakantiedagen bij te kopen via ons cafetariaplan.

Een compleet salarispakket met onderstaande extralegale voordelen

Maaltijdcheques;
Groeps- en hospitalisatieverzekering, verzekering gewaarborgd inkomen;
Mogelijkheid tot bedrijfswagen met tankkaart (afhankelijk van de functie);
Gsm-abonnement;
Cafetariaplan.

Bijna overtuigd? Lees hier wat onze collega’s vinden van werken binnen Contec:

https://contec-ias.com/jobs/#testimonials

Ready to say YES to new adventures? Solliciteer snel, of stuur ons jouw cv via recruitment@contec-ias.com

Niet jouw ding, maar ken je wel de ideale persoon voor deze job? Deel gerust de vacature via onze social mediakanalen of via mail.

Back

Apply

Back

Sales Engineer

Hasselt, Belgium

Employee

Option for/Allows Remote Job

Hasselt

We probably don't need to tell you that automation is the future. At Contec, we make it our mission to make industrial processes future-proof. We are in full growth and therefore constantly looking for new colleagues. Are you ready to build the factory of the future with us?

To expand our Sales team, we are looking for a Sales Engineer.

Your responsibilities include the following:

You will prepare customised quotations for our customers' upcoming automation projects. These quotations include our services (ranging from E&I, PLC/SCADA to MES/IT) and/or materials. For this, you work closely with the Business Area Sales Manager;
If necessary, you participate in meetings with the customer in which they clarify their needs and expectations. During these meetings, you assume the role of technical specialist and listen to their questions and ideas;
You can read and interpret specifications;
You contact customers in the quotation phase when specifications are still unclear;
You have contact with possible suppliers in connection with prices and technical specifications;
For detailed questions outside (and within) your own specialisation, you can fall back on the project engineers of the various departments;
You present your offer as a conclusive story on the customer's demand and defend the choices made on the basis of well-founded arguments.

Passion for automation? It’s you we’re looking for!

You have a degree in a technical field or equivalent through experience;
You have a thorough knowledge of one or more branches within industrial automation;
You can work autonomously as well as in a team;
Thinking analytically and working accurately are no problem for you;
You enjoy working on projects on a conceptual basis;
You are communicative and enjoy contacting customers, suppliers or colleagues to gather sufficient information to make a competitive offer;
You are stress-resistant and strong in organising your work. You set priorities and respect deadlines;
You are fluent in Dutch, French and English;
You are in possession of a driving licence B;
You are fluent in MS Office (Excel, Word, PowerPoint).

Why Contec?

Be a part of the Contec group

With our 9 international offices, the Contec Group has some 250 motivated specialists who would love to welcome you to their team. We have a flat organisational structure resulting in an open and transparent atmosphere. Furthermore, our employees can participate in Contec's shareholder plan and are given the chance to work on international projects within a variety of sectors.

Guidance on the job

A good balance of young talent and experienced colleagues ensure that you will receive appropriate guidance throughout your Contec career;
A training offer for further development both personally and professionally.

Work-life balance

Flexible hours: start between 07h00 & 09h30 and stop between 15h30 & 18h00;
Glide hours;
Possibility to work from home (1 day/week);
20 legal holidays, 12 ADV days and the option to buy up to 5 additional holidays through our cafeteria plan.

A salary package with the following additional benefits

Meal vouchers;
Group and hospitalisation insurance, insurance guaranteed income;
Possibility of company car with fuel card (depending on position);
Mobile phone subscription;
Cafeteria plan.

Almost convinced? Read here what our colleagues think about working within Contec:

https://contec-ias.com/jobs/#testimonials

Ready to say YES to new adventures? Apply quickly, or send us your CV via recruitment@contec-ias.com

Not your thing, but do you know the ideal person for this job? Feel free to share the vacancy via our social media channels or via email.

Back

Apply

Back

Sales Engineer Global Accounts

Antwerpen, Belgium

Employee

Option for/Allows Remote Job

Kortrijk

Antwerp

Poland

Romania

France

Hasselt

We probably don't need to tell you that automation is the future. At Contec, we make it our mission to make industrial processes future-proof. We are in full growth and therefore constantly looking for new colleagues. Are you ready to build the factory of the future with us?

To expand our Sales team, we are looking for a Sales Engineer.

Your responsibilities include the following:

You will prepare customised quotations for our customers' upcoming automation projects. These quotations include our services (ranging from E&I, PLC/SCADA to MES/IT) and/or materials. For this, you work closely with the Global Accounts Manager;
If necessary, you participate in meetings with the customer in which they clarify their needs and expectations. During these meetings, you assume the role of technical specialist and listen to their questions and ideas;
You can read and interpret specifications;
You contact customers in the quotation phase when specifications are still unclear;
You have contact with possible suppliers in connection with prices and technical specifications;
For detailed questions outside (and within) your own specialisation, you can fall back on the project engineers of the various departments;
You present your offer as a conclusive story on the customer's demand and defend the choices made on the basis of well-founded arguments.

Passion for automation? It’s you we’re looking for!

You have a degree in a technical field or equivalent through experience;
You have a thorough knowledge of one or more branches within industrial automation;
You can work autonomously as well as in a team;
Thinking analytically and working accurately are no problem for you;
You enjoy working on projects on a conceptual basis;
You are communicative and enjoy contacting customers, suppliers or colleagues to gather sufficient information to make a competitive offer;
You are stress-resistant and strong in organising your work. You set priorities and respect deadlines;
You are fluent in Dutch, French and English;
You are in possession of a driving licence B;
You are fluent in MS Office (Excel, Word, PowerPoint).

Why Contec?

Be a part of the Contec group

With our 9 international offices, the Contec Group has some 250 motivated specialists who would love to welcome you to their team. We have a flat organisational structure resulting in an open and transparent atmosphere. Furthermore, our employees can participate in Contec's shareholder plan and are given the chance to work on international projects within a variety of sectors.

Guidance on the job

A good balance of young talent and experienced colleagues ensure that you will receive appropriate guidance throughout your Contec career;
A training offer for further development both personally and professionally.

Work-life balance

Flexible hours: start between 07h00 & 09h30 and stop between 15h30 & 18h00;
Glide hours;
Possibility to work from home (1 day/week);
20 legal holidays, 12 ADV days and the option to buy up to 5 additional holidays through our cafeteria plan.

A salary package with the following additional benefits

Meal vouchers;
Group and hospitalisation insurance, insurance guaranteed income;
Possibility of company car with fuel card (depending on position);
Mobile phone subscription;
Cafeteria plan.

Almost convinced? Read here what our colleagues think about working within Contec:

https://contec-ias.com/jobs/#testimonials

Ready to say YES to new adventures? Apply quickly, or send us your CV via recruitment@contec-ias.com

Not your thing, but do you know the ideal person for this job? Feel free to share the vacancy via our social media channels or via email.

Back

Apply

Back

Spontaneous application Amiens

Dury, France

Employee

Partial Remote Job

France

Would you like to work at Contec but there are no suitable jobs on the website? Please feel free to send us your CV anyway!

We will contact you for an introductory chat if we see an immediate opportunity for you. If not, we will keep your data in our database so we can contact you in the future!

Back

Apply

Back

Spontaneous application Antwerpen

Antwerpen, Belgium

Employee

Antwerp

Would you like to work at Contec but there are no suitable jobs on the website? Please feel free to send us your CV anyway!

We will contact you for an introductory chat if we see an immediate opportunity for you. If not, we will keep your data in our database so we can contact you in the future!

Back

Apply

Back

Spontaneous application Hasselt

Hasselt, Belgium

Employee

Hasselt

Would you like to work at Contec but there are no suitable jobs on the website? Please feel free to send us your CV anyway!

We will contact you for an introductory chat if we see an immediate opportunity for you. If not, we will keep your data in our database so we can contact you in the future!

Back

Apply

Back

Spontaneous application Kortrijk

Kortrijk, Belgium

Employee

Kortrijk

Would you like to work at Contec but there are no suitable jobs on the website? Please feel free to send us your CV anyway!

We will contact you for an introductory chat if we see an immediate opportunity for you. If not, we will keep your data in our database so we can contact you in the future!

Back

Apply

Back

Spontaneous application Lodz

Lodz, Poland

Employee

Poland

Would you like to work at Contec but there are no suitable jobs on the website? Please feel free to send us your CV anyway!

We will contact you for an introductory chat if we see an immediate opportunity for you. If not, we will keep your data in our database so we can contact you in the future!

Back

Apply

Back

Spontaneous application Newcastle

Newcastle Upon Tyne, United Kingdom

Employee

Partial Remote Job

United Kingdom

Would you like to work at Contec but there are no suitable jobs on the website? Please feel free to send us your CV anyway!

We will contact you for an introductory chat if we see an immediate opportunity for you. If not, we will keep your data in our database so we can contact you in the future!

Back

Apply

Back

Spontaneous application Ploiești

Ploiesti, Romania

Employee

Romania

Would you like to work at Contec but there are no suitable jobs on the website? Please feel free to send us your CV anyway!

We will contact you for an introductory chat if we see an immediate opportunity for you. If not, we will keep your data in our database so we can contact you in the future!

Back

Apply

Back

Spontaneous application USA

Greensboro, United States of America

Employee

USA

Would you like to work at Contec but there are no suitable jobs on the website? Please feel free to send us your CV anyway!

We will contact you for an introductory chat if we see an immediate opportunity for you. If not, we will keep your data in our database so we can contact you in the future!

Back

Apply

Back

Stage Electrical Engineering

Antwerpen, Belgium

Internship

No remote work

Antwerp

Dat automatisatie de toekomst is, hoeven we je vast niet te vertellen. Bij Contec maken we er dan ook onze missie van om industriële processen future proof te maken. We zijn in volle groei en daarom ook continu op zoek naar nieuwe collega’s. Ben jij er klaar voor om samen met ons aan de factory of the future te bouwen? Dat kan!

Voor ons E&I team, dat zich voornamelijk bezighoudt met het elektrisch ontwerp van installaties, zijn we momenteel op zoek naar een stagiair met een passie voor elektriciteit en engineering.

Wat houdt een stage bij E&I juist in?

Assistentie bij het ontwerp van een nieuwe elektrische installatie voor een tankenpark. Volgende elektrische engineering diensten moeten hierbij worden geleverd :

Piping & Instrumentation Diagrams afchecken met de instrumentlijst en een lijst van inconsistentie opstellen.
Een motoren lijst opstellen en samen met de power afdeling de geschikte kabels bepalen (in CANECO).
Voor elk meetinstrument en afsluiter zal een aansluit typical worden opgezocht uit de documentatie van de leverancier, dit als basis voor een type schema in EPLAN.
Helpen bij het ontwerp van de remote IO borden (RIO), het PLC bord, de netwerk kast (FO), de gasdetectie kast.
Validatie van de schema’s van de MCC leverancier.
Opzetten van een plan voor de automatische schema generatie van de RIO-, PLC-, netwerk- en gasdetectie kasten.
Opstellen van een constructie dossier voor de uitvoering van de werken.
Meehelpen bij het opstellen van de ATEX Exi validatie.
Validatie van het SIL niveau van de veiligheidskringen

Ready to say YES to new adventures? Solliciteer snel, of stuur ons jouw cv via recruitment@contec-ias.com

Niet jouw ding, maar ken je wel de ideale persoon voor deze job? Deel gerust de vacature via onze social mediakanalen of via mail.

Back

Apply

Vacancies

Spontaneous applications

Werken bij Contec

Over ons

(Junior) Automation Engineer Ploiesti

(Junior) Electrical Engineer (E&I) Hasselt

(Junior) Electrical engineer Amiens

(Junior) Power Engineer

Associate Automation Engineer Antwerp

Associate Automation Engineer Łódź

Associate Automation Engineer region Lille - North of France

Associate Electrical Engineer (E&I) Antwerp

Associate Electrical Engineer (E&I) North of France

Automation Engineer Amiens

Automation Engineer Liverpool

Automation Engineer Newcastle with experience

Business Area Sales Manager Lodz

E&I Designer Antwerp

Electrical & Instrumentation Designer Hasselt

Junior Automation Engineer Greensboro

Junior Automation Engineer Hasselt

Junior Automation Engineer Kortrijk

Junior Automation Engineer Łódź

Junior Automation Engineer Newcastle

Junior Electrical Engineer (Task Force Mechelen)

Junior Electrical Engineer Ploiești

Safety Officer

Sales Engineer

Sales Engineer Global Accounts

Spontaneous application Amiens

Spontaneous application Antwerpen

Spontaneous application Hasselt

Spontaneous application Kortrijk

Spontaneous application Lodz

Spontaneous application Newcastle

Spontaneous application Ploiești

Spontaneous application USA

Stage Electrical Engineering